Diathermy Touch FX-400x

Output Characteristics

	Modes	Maximum P-P Voltage	Rated Load (OHMS)	Maximum Power (Watts)	*Crest Factor (Typical)**
Monopolar Cut	Pure	900	500	400	1.5
	Blend I	1100	500	300	2.1
	Blend II	1200	500	250	2.4
	Blend III	1300	500	200	2.8
	Blend IV	1300	500	150	3.1
Monopolar Coagulation	Soft	1600	500	300	3.5
	Desiccate	1800	500	250	3.8
	Force	2100	500	200	4.2
	Spray	3000	500	120	6.8
Bipolar	Micro	320	100	70	1.5
	Standard	460	100	90	1.5
	Marco / Cut	600	100	120	1.5

DESCRIPTION

VESSEL SEALING MODE : Pure Sine wave 440 kHz Seal – Pulse output mode,
Soft-Seal 120 W at 100 CF1.5
Med-Seal 200 W at 100 CF1.5
Rapid-Seal 350 W a t 100 CF1.5

PPQM System
Measuring Frequency : 85 kHz ± 10 kHz
Measuring current : <10 μA
Dual Area Patient Return Electrode : 5-135 Ω

Application Fields
Opthalmic, Laparo Surgery, GI, Ortho, Open & General Surgery, Onco, Gynecology, Hernia, GI Endocut, Papillotomy, Polypectomy, Under Water, Urology, Gynec TCRE, Hysteroscopy, Thoracotomy, Unit is suitable for all kind of Open, Endoscopic, Laparoscopic and Minimally Invasive Surgery Plastic, Neuro, ENT, Spine, Thoracic and Cardiac Surgery.

Safety Standards
Classification according to the EC-Directive 93/ 42/ EEC. Class llb General Safety Standards : IEC 60601-1-1, IEC 60601-2-2 EMI/EMC Compatibility Standard : IEC 60601-1-2 IS Safety Standard : IS 7583.

Leakage Current
HF Leakage Monopolar <100 mA RMS-Bipolar <50 mA RMS
Low frequency : Normal polarity, intact ground : < 10 μA
Normal polarity, ground open : < 50 μA

INPUT POWER
Operating Voltage : 190-260 Volt 50Hz AC, (Optional 90-120Volts 60Hz AC)
DIMENSIONS : L x W x H – 350 x 350 x 130mm Net Weight in 605 Kg.